The duration of the construction period will be 12 months. The work is expected to begin from April - 2010.

Through this service, we wish to provide one more facility for our clients.

*Japan Office Services

Please feel free to contact us at here.

This time we spoke with Mr. Muneer Alam, who heads Bank of India in Japan. Both the parts have been uploaded together so please feel welcome to go through it.

Mr. Muneer Alam (First part)
Mr. Muneer Alam (Last part)

We aim to introspect Japan through these interviews

• Minimum 5 years of engineering design experience of majot industrial petrochemical projects
• Engineering Degree
• Fluent Speaker of English

Please contact Abhi at abhi.kumar@geo-manage.com  or call at 81-3-56148501

Requirements

• Experienced in the operation and management of Primavera planning software
• Fluent in English
• Ability to work under pressure

Please contact Abhi at abhi.kumar@geo-manage.com  or call at 81-3-56148501

The client is a major EPC company in Yokohama

# The person should be experienced in the operation and management of electronic data systems.

# Fluent speaker of English

Please contact Abhi at abhi.kumar@geo-manage.com  or call at 81-3-56148501

Position               :  Senior Process Engineer  

Report to             :  Lead Process Engineer (Discipline Leader)

Priamry Responsibilities:

1.      Assists the Lead Process Engineer and MPMT (Master Project Management Team) Senior Process Engineer related to process engineering of each RFS (Request for Service) for Long Term EPCm Contract Services for the client in Qatar.

2.      Prepares coordination procedures including Scope of Work (SOW), Work Demarcation Table and Work Schedule for the above mentioned purpose.

3.      Prepares the requirements for support by the Process Engineering Department of our firm for a work order other than our client Long Term EPCm.

4.      Coordinates with the Process Engineering Department of our firm's related to process engineering for developing the design of individual RFS and Work Order including support to home office such as providing additional local information/data,

5.      Prepares the execution plan for process design and engineering with the Lead Process Engineer for the essential activities including;

·          Design basis development

·          Preparation of PFD and P&ID

·          Preparation of process data sheet for equipment

·          Line sizing calculations

·          Process simulations and H&M balance

·          Utility consumption calculations

·          Control valve and safety relief valve sizing calculations

·          HAZOP related activity and preparation of cause and effect matrix

·          Use of software such as PIPEPHASE, HYSIS

·          Assessment of operation data for improvement

·          Support to commissioning and start-up activities

6.      Supervise the Process Engineer and P&ID Engineer for executing the above mentioned activities to implement without fail in terms of quality and schedule.

 Contact Abhi Kumar at abhi.kumar@geo-manage.com with your latest resume.

POSITION DESCRIPTION

Title:Senior Mechanical Engineer

Reports to:  Project Manager (PPMT)

PRIMARY RESPONSIBILITIES

1.        Assists the Project Manager (Site) related to mechanical engineering

(rotating machines,pressure vessel,piping etc.) as one of members of the Project Proposal Management Team (PPMT) for Long Term EPC Contract Services for our client in Qatar (herein-after referred to as PROJECT).

2.        Is responsible for the following duties in terms of mechanical engineering:

·           Coordinating all activities related to execution of individual projects identified by our client in Qatar  from time to time between client and Contractor's Project Team for each RFS (Request for Service)

·           Assisting our client in Qatar  in developing SOW (Scope of Work) & Design

·           Development of SP (Service Proposal)

·           Develop PEP (Project Execution Plan) & Project Scheduling

3.        Closely coordinates with our client inQatar and try to identify the engineering issues which are critical for cost, schedule, quality, operability, safety etc. from the mechanical engineering point of view ,and produce a proposed　(recommended)technical solution(basic plan) for our client so that it can lead to RFS.Conducts site survey upon request by the client  or with agreement by the  client  .

4.        Requests our firm's home office to develop a detailed proposal to be submitted to  the  client  ,if our firm's home office's expertise is required for consideration of RFS by the  client  .

5.        Coordinates with the our firm's home office for defining SOW,preparing

Service Proposal in the area of mechanical engineering.

6.        Gives advices, if requested by the our firm's Project Team(in Qatar) during

Detailed engineering, construction, precommissioning, and commissioning.

7.        Coordinates withour firm's home office and RG during detailed engineering,

 construction ,precommissioning, and commissioning, if required,     Produces a list of applicable specifications for each SO ,and basic requirements as required.

QUALIFICATIONS

Relevant Experience:

l  Planning,coordinating and supervising major component/equipment

engineering and other design activities in oil and gas projects.

l  Min.Years in Oil & Gas Industry: 10 years, and 2 years in the position.

l  Professional Skills and Competency: Familiar with design codes and standards, GS/DIM/IP's, latest design, engineering, and analytical techniques/software, especially for rotating machinery , pressure vessels and heat exchanger.

 Contact Abhi Kumar at abhi.kumar@geo-manage.com with your latest resume

The nature of work is Market Research and the period of work will be between September 2009 and November 2009

Required language Skills

　Kannada⇔Japanese

　Tamil⇔Japanese

　Bengali⇔Japanese

　Marwari⇔Japanese

・Required Japanese Level：

JLPT Level 1

・Other Requirements：

　Only female candidates currently living in India are eligible to apply

　（Depending on the language ability, it is possible to accept application from candidates currently living in Japan also）

・Schedule：

　4 days a week between September and November

　6 hours per day

If you are interested, please feel free to send your updated resume and best rates at here.

 Contact Person：Abhi Kumar（03-5614-8501）

→Bilingual Coordinator Logistics

→Business Analyst - Logistics

→Project Manager - Logistics

→Project Manager - AS400

→Business Analyst Finance

→Tech. Consultant Finance

→Mainframes Jr Programmer

→Mainframes Sr Programmer

→Dotnet Programmer

→Sales Jr. Banking and Finance

→Pre sales Sr. Banking and Finance

→SAP Any Module

→Accountant Insurance

→Business Analyst Risk Management

→Click here for job information(Japanese only).

→Click here for job information.